Now I dont have any dns server any more frome my webhost how do I fix dns on ehcp ?
I own a doman name .
Wed, 04/29/2009 - 09:58
You have to check with your hostmaster.
For example if you have an .DK domain, you need to check dk-hostmaster.
In the case of a .DK domain you can be the registrar as a private person, but you need DNS from a trusted supplier.
If it's an .EU domain you can't register the domain yourself, but need a trusted registrar as well as DNS provider.
So in summary you need to find a DNS supplier and configure it.
I use http://web.gratisdns.dk/ (don't know if they accept anything but danish customers, but it looks like they do).
the don't provide any kind of support, but on the other hand I get to configure anything specifically to my needs - sweet..
Wed, 04/29/2009 - 10:30
I have all my domans .se so I need to check with .se then ?
But I have buy the name from I webhost so do I need somthing frome him ?
And What do I need for som kinde of information ?
Wed, 04/29/2009 - 21:58
But what kind of info do I need to make my dns server to work ?
Where on ehcp do I write the info in so it will work ?
Thu, 04/30/2009 - 01:15
as described on links that i provide:
in fact, you dont need to do anything special in ehcp, on your server,
* a normal ehcp install, (if you previously installed, dont touch anything)
* Then redirect your domain to ns1.yourdomain.com and ns2.yourdomain.com, and register ns1.yourdomain.com and ns2.yourdomain.com as pointing to your server ip, from where you bought (buy) your domain.
the links that i provide describes that in detail, mostly..
ehcp is ready to do that, you dont need to do any setting in ehcp, just setup yourdomain.com in ehcp normally.
Thu, 04/30/2009 - 11:51
Then redirect your domain to ns1.yourdomain.com and ns2.yourdomain.com, and register ns1.yourdomain.com and ns2.yourdomain.com as pointing to your server ip, from where you bought (buy) your domain.
where do I redirect my domain to ns1.yourdomain.com ns2.yourdomain.com and where do I register ns1.yourdomain.com and ns2.yourdomain.com as pointing to your server ip ?
Thu, 08/20/2009 - 15:04
If your machine can connect to the internet fine, ping IP addresses, but won't connect to any sites, then I may have the answer. The first thing to check is that your internet connection is functioning. This is easy to do if you've got a router and other computers on the network, simply go to a website on another machine. If you're on dial-up or a stand-alone machine it is slightly more difficult but you can do it if you are get the services of cheap vps services along with the managed dedicated hosting services.
The first and easiest way to see if you are talking to the outside world is to try to ping an IP address. Click Start->Run and type command into the box. Press OK. In the DOS box that pops up type ping 22.214.171.124 (Google's IP). If you get responses you know immediately that your connection is fine. If you can ping the address, this means that more than likely you can type the IP address into the address bar in your browser and Google should come up. If not, you may have browser issues as well which can be solved easily, but if you are using services of asp net hosting then no problem will create or they will solve the problem easily.
Wed, 04/29/2009 - 12:23
You may configure your own dns with ehcp, if you have a domain name.
You dont need any hosting provider, in fact you "ARE BECOMING" a hosting provider with ehcp.
You only need: a domain, a static ip, a server, your domain redirected to your ip/server,
Follow/look on these:
Wed, 01/27/2010 - 07:45
Could I create my own dns servers with only 1 IP address
most ehcp users do same way
ehcp_user: without using dns hosting with the registrar of the domain ?
Sent at 12:15 AM on Wednesday
ehcp_user: I've already registered my desired nameservers (the domain is in Godaddy - I've seen information that the nameservers should be submitted to some kind of ns register)
me: godaddy is ns register itself.
there is no separate ns register.
but, unfortunately, some registrars, do not allow same ip to be used for ns1 and ns2
I am not sure about godaddy.
nameservers (ns) are registered in domain sellers (registrars) such as godaddy
Sent at 12:18 AM on Wednesday
ehcp_user: there was no problem - I just added ns1 and ns2 as Host Summary and selected the same IP for both of the ns servers
Sent at 12:20 AM on Wednesday
ehcp_user: I just can't understand what will "hold" the ns records if there's no A record (or CNAME) for ns1.domain.com
Sent at 12:24 AM on Wednesday
if anybody asks for domain.com
first, ask to internet big, godfather, icann, for "who is registrar"
registrar found in icann
a query is sent to registrar as: "who is dns server for this domain?"
registor knows, and should know dns
this way dns is learned.
then, a new query is sent to dns as " who is web server for this domain"
at this stage, if no dns is defined. nothing returned.
if defined, website is returned.
so, even if you have no ns record in your dns, registrar may know your dns (if you define it in registrar.) . but, without your dns records, your website cannot be seen in web.
ehcp_user: yes, I understood most of the information
then even the domain.com itself could be pointed to hosting ns servers ns1.domain.com and ns2.domain.com ?
Sent at 12:32 AM on Wednesday
ehcp_user: and after the request for the website(server) bind handles all requests (mail/subdomains/cname records and other records) ?
Sent at 12:33 AM on Wednesday
Sent at 12:34 AM on Wednesday
ehcp_user: then the only thing that is required is to register the ns servers in host summary in godaddy and it's done ?
me: register ns in godaddy, then setup your server/ehcp in that ip
add domain to ehcp.
Sent at 12:37 AM on Wednesday
ehcp_user: yes, sure
this was very helpful
I was depending on other's dns'es from a very long time
me: with ehcp, you have your own dns.
these are in fact, explained in http://www.ehcp.net/helper/yardim/cats.php
ehcp_user: I'll check it now
Thu, 04/25/2019 - 18:56
my registrar, do not allow same ip to be used for ns1 and ns2
How do I bypass this thing? It would be useless without nameservers :/
Copyright © 2022, Easy Hosting Control Panel
Design by Zymphonies